- Innovative and highly efficient accessory drilling and screwing station for corner and truss bed frames
- Fast and precise work – this machine provides a surprising increase in productivity in window manufacturing
- Thanks to its easy use and ergonomically designed workflow, corner truss beds can be drilled, fitted and screwed by an employee
- Thanks to the movable support system, it is not necessary to drill the connection and screw holes using a template
- Unit can be rotated 90 ° for the machining of multi-leaf frames
- The adjustment device used to drill the bearing shaft in the Y-direction in multi-wing frames can be positioned by means of raster dimensions
- With the screwing feeder that can be moved manually on the horizontal and slide slide, the corner truss beds are screwed to the closed frames
- Unit; It is equipped with an automatic screw feed, a screwdriver turbine for screwing in self-tapping bolts and a pneumatic screw-depth stop.
- Pneumatic frame clamping and positioning device can be moved on the center of the table
- Possible frame duct sizes are between 360 and 3,400 mm
- 2 pneumatic duct stoppers that can be lowered with the turret for 4 different frame installation depths
- Laser assembly to show the screwing location
TECHNICAL INFORMATION
- Bench length 4.040 mm
- Bench width 1.700 mm
- Total length: 4.220 mm
- Total width: 2.010 mm
- Height 1.720 mm
- Bench height can be adjusted between 950 – 1.050 mm
- Min. frame size 560 x 200 mm
- Max. frame size 3,800 x 1,700 mm
- Min. profile height 54 mm
- Max. profile height: 110 mm
- Weight 650 kg
- Air pressure: 7 bar
- Air consumption:
- Screwdriver approx. 250 l / min.
- Clamping device approx. 40 l / min.
Screw dimensions:
- Head diameter: 6.0 – 9.0 mm
- Shaft diameter 3.0 – 4.5 mm
- Length approx.10.0 – 35.0 mm
- Electricity: 230/400 V, 3 ~, 50 Hz
